Contents

1 Introduction

The purpose of the document is to describe use cases and functionalities of the Voice for Dynamics 365 solution.

The document covers softphone use cases for Voice for Browser web phone. If you are using Voice for Windows softphone, login and softphone usage is different than described in this document.

Pre-requisites

• Customer’s Microsoft Dynamics 365 org. and needed Dynamics 365 apps are activated for Voice for Dynamics 365 usage.

• End user is activated for Enreach Cloud for Dynamics 365 both Microsoft Dynamics 365 org. and Enreach Cloud.

• End user’s Enreach Cloud user role must include Voice web phone usage in-order to use workstation-based phone use cases. “Voice User”-role privileges are required in D365.

• Embedded Voice web phone in Dynamics 365 is supported using Chrome web browser.

• Please save all phone numbers to Microsoft Dynamics 365 in exact E. 164 format.

E.g. +358123456789

1.1 Login to the solution

1) User logins as normal to Microsoft Dynamics 365 web user interface

2) User opens any Dynamics 365 app, where also Voice for Dynamics 365 is activated.

3) Voice web phone panel is visible on the right side of Dynamics 365 App UI (in case CIF1 sigle-session app) or on the left side of the App UI (in case CIF2 multi-session app). Voice for Dynamics 365 will log in automatically. Please allow the microphone use / access by the Chrome browser.

4) Voice for Dynamics 365 web phone is used for controlling phone calls, managing voice channel availability status and caller phone numbers.

Important notes:

• Voice for Dynamics 365 web phone shall be used in a single Dynamics 365 browser view / tab, where new views and pages are opened within the same single browser view / tab.

• Avoid refreshing the whole browser view / tab (e.g. Ctrl + F5). Instead, if you need refresh information on the active page, use built in Dynamics 365 options (use refresh-button on the Dynamics 365 ribbon) for doing so. This ensures that Voice for Dynamics 365 web phone continues functioning as normal.

If you refresh the whole browser view / tab, the Voice for Dynamics 365 web Phone logs out and then logs in again. Active phone call is also disconnected and no incoming calls can be received if you refresh the whole browser view / tab.

Open

CIF version 1.0, single-session Dynamics 365 model-driven apps (Communication panel on the right side)

Open

CIF version 2.0 (Omnichannel for Customer Service, Customer Service Workspace, Communication panel on the left side)

1.2 Availability Management

Enreach Cloud voice service typically includes customer specific availability statuses, but they always follow the status types described in this chapter. User controls available statuses via Voice for Browser web phone. Depending on Enreach Cloud user role, user may additionally be able to control availability on different voice channel service pools.

• Offwork

• Not available to receive voice channel service pool calls

• Available to receive direct calls (depending on user’s call forwarding settings)

• Able to make outbound phone calls

• If Lunch option is selected, same functionality for 30 min.

• Available

• Available to receive voice channel service pool calls

• Available to receive direct calls (depending on user’s call forwarding settings)

• Able to make outbound phone calls

• DND

• Not available to receive voice channel service pool calls

• Not available to receive direct calls (depending on user’s call forwarding settings)

• Able to make outbound phone calls

1.3 Voice for Dynamics 365 Web Phone

Web browser based softphone supported in Chrome browser.

General functionality:

• Voice for Dynamics 365 web phone is based on WebRTC technology

• Make phone calls via web phone contact directory, keypad or call history

• Make phone calls via Dynamics 365 view (click-to-dial)

• Answer, end and decline phone calls

• Selecting caller number for outbound phone calls

• Mute / Unmute microphone

• Hold / Unhold phone call

• Call transfer (direct transfer and consulted transfer)

• DTMF by keypad (ordinary telephone's touch keys available)

• Caller identification from web phone contact directory and voice channel service pool queue name with receiving phone calls

• Availability status management

• Managing availability in voice channel service pool queues

• Voice channel service pool queue details dashboard

• Call history

• Additional user settings are managed via Voice Center by Enreach web and Enreach Voice App mobile ui’s

More detailed instructions via separate Voice for Browser user guide.

See Link to Enreach Wiki-page.

1.3.1 Single-session Web Phone (CIF1)

When the phone is used in CIF1 solution (phone is located on the right side of the window), the phone can be loaded and initialized in one, so-called primary session only. Initialization and conflict check (so that any other instances of the phone under same user context is not in use anywhere else) takes some time. During this process you will see a progress indicator.

After initialization and conflict check is ready, phone user interface becomes visible, calls can be made and received.

If phone is already in use in another window or browser tab under the context of same user, a message is displayed after initialization. If the phone works properly in the primary window, this message can be ignored.

2 Phone Workflows

Choice of different phone workflows, which determine the action with inbound and outbound phone calls. Phone workflow is configured by Enreach.

• Phone Call activity: Automated Phone Call activity creation for identified Contact / number

• CaseDialog: New & Existing Case handling with contact dialog. Targeted for contact identification and case handling.

• Contact&Account: Contact & Account identification and screen pop-up.

2.1.1 Inbound call – Single identified customer

1. Phone call rings on web phone

   1. Voice panel is forced to maximized mode

   2. Contact card is opened in the main area

      1. If there is unsaved record on the agent’s table – no action will be taken. Contact card will be opened when user answers the call

2. If user answers the call, then call notes area appears in the Voice pane and it can be used for writing notes during the call.

   1. Contact card will be shown if it was not done in step 1.b

   2. When call is ended, a new Phone call activity is automatically created (description field will contain phone call notes)

   3. Advanced call details (link to call recording) automatically updated in 20-40 seconds after creation

3. If user declines the call, no action is taken

4. When close button is pressed in web phone, Voice pane is forced to the minimized mode

2.1.2 Inbound Call – Not identified / Multiple identified customers

1. Phone call rings on web phone

   1. Voice pane is forced to the maximized mode

   2. If there is unsaved record on the agent’s table – no action will be taken. Otherwise, contact card will be opened when call rings

2. If user answers the call, then call notes area appears in the Voice pane

   1. If multiple customers (contacts or accounts) were found by the search, results are shown right below Voice phone control, within Caller sub-tab. User can open the records by clicking on name. To pick one of the callers, the check mark next to the desired caller must be clicked.

   2. When call is ended, new Phone call activity is automatically created. Call From and Regarding attributes are filled if either

      1. there was a single identified customer or

      2. multiple customers were found, but the agent picked one of those

   3. Advanced call details (link to call recording) automatically updated in 20-40 seconds after phone call activity is created

3. If user declines the call, no action is taken

4. When close button is pressed in web phone, Voice pane is forced to the minimized mode

2.1.3 Outbound call – Single identified customer

1. Phone field configured for Click to dial in D365 is clicked

2. Phone call rings on web phone

   1. Voice pane is forced to the maximized mode

3. No action is taken

4. If customer answers the call, then call notes area appeared in the Voice pane

   1. When call ended, new Phone call activity is automatically created (description field will contain phone call notes)

   2. Advanced call details (link to call recording) automatically updated in 20-40 seconds after creation

5. If user declines the call, no action is taken

6. When close button is pressed in web phone, Voice pane is forced to the minimized mode

2.1.4 Outbound call – Not identified / Multiple identified customers

1. Phone field configured for Click to dial in D365 is clicked

2. Phone call rings on web phone

   1. Voice pane is forced to the maximized mode

3. No action is taken

4. If customer answers the call, then call notes area appears in the Voice pane

   1. When call is ended, new Phone call activity is automatically created. Call To and Regarding attributes will be empty

   2. Advanced call details (link to call recording) automatically updated in 20-40 seconds after creation

5. If user declines the call, no action is taken

6. When close button is pressed in web phone, Voice pane is forced to the minimized mode

3 Omnichannel user status management

If the Dynamics environment is running Omnichannel (user status feature is available as in the upper right screenshot), which uses Unified Routing engine to distribute work items to the user, it is essential to keep user status of Omnichannel and Web Phone in sync. If the status of user becomes Do not Disturb – either because of reaching maximum capacity or the user manually changed the status –, the system automatically blocks incoming calls by setting the user DND in Web Phone as well.

When user status is changed when not in a call, status is mirrored between Omnichannel and Web Phone according to the following mappings:

When the agent is receiving or making a call, Omnichannel status is set to Do not Disturb, to prevent Unified Routing from distributing any work item to the user during a call.

When the call ends, Omnichannel status is reset to the value which was active right before the call.

4 Phonecall Activities and Details in Dynamics 365

By default, call details are automatically saved as phone call activity in D365 for all answered calls handled via web phone integration for single identified customers. This occurs when the phone call ends. If customer was not identified or multiple occurrences exists – phone call form with pre-populated values will be shown when call is ended and needs to be completed and saved by agent.

Following fields are populated:

• Regarding*

• Description – is taken from the notes area in Voice for Dynamics 365 pane

• Call From*

• Call To*

• Phone Number

• Direction

• Actual Start

• Actual End

• Duration

• Call Recording** – URL will be automatically updated in 20-40 seconds after creation.

• Call Arrived At***

• First Answered At***

• Wait time (until first answer) ***

* - Will be filled in only for the identified customer

** - If the phone call activity completed before this time, the link will not appear.

*** - Populated when there is an incoming call from a call queue / pool.

4.1 Call Metrics

If the agent received an incoming call from a pool (queue), shortly after ending the call (in 20-30 seconds) the following fields get populated:

• Call Arrived at: The date and time when the call reached Enreach’s infrastructure and entered a queue

• First Answered At: The date and time the call was answered by a human agent for the first time

• Wait Time (until first answer): The time spent (in seconds) in the queue, waiting to be answered by an agent

The fields are visible on the form only when have any value.

5 PhoneCall Syncronization in Voice for Dynamics 365 (Enterprise Calls)

Enables phone call activity creation in D365, which were not already done and created by Voice for Dynamics 365 embedded webphone. Main use case is customer calls answered/made in another Enreach Cloud voice endpoint e.g. Mobile and Voice for Teams phone calls.

Phone Call activity creation happens automatically for Dynamics 365 users that have Enreach email address and id set in Voice Configurator. The user must also have mobile number set to user form in Dynamics 365. When user calls or receives a call to/from a user that is listed as a contact in Dynamics 365 the Call data is imported to Dynamics 365. By default calls that are classified as Work calls (Call information privacy setting in Voice Center side) are synchronized. Unclassified and Private calls are not Synced to D365.

Configuration is described in separate Voice for Dynamics 365- Configuration guide for admins.

6 Callbacks

Voice for Dynamics 365 includes option to integrate Enreach Cloud callback functionality with Dynamics 365. With this integration callback logic and service are implemented as standard service module at Enreach Cloud side, but callback requests are fully handled in D365.

• Integration can be activated on Enreach Cloud callback list per D365 queue basis. Configuration is described in separate Voice for D365 - Configuration guide for admins.

• As soon as customer leaves callback on Enreach Cloud side, information is fetched to D365 and created as D365 Phone Call activity.

• Timespan is configurable and webjob is continuous by default.

• All callback request handling is thereafter happening at D365 side. (As soon as callback request is successfully created on D365 side, it is automatically closed on Enreach Cloud side with “Handled by D365” note.)

• Callback phone calls are assigned to configured Dynamics 365 queues.

• Contact/Account/Lead identification is done based on caller’s phone number.

  • If single Contact/Account/Lead is identified, then Phone Call activity is created for this record.

  • If multiple or none Contact/Account/Lead is identified, then Phone Call activity is created without Regarding and From attributes.

• Callback Phone Call activity subject is: “Callback Request”

• Standard Voice for Dynamics 365 functionality brings added value for callback handling as agents can use Click-to-dial for outbound calls from automatically created phone call activities.

Users can see the list of open callback requests by navigating to Queue Item view, e.g. by clicking Queues menu on the left within Customer Service Hub app and then selecting Open Callback Requests view. The user can – amongst other details – see for each callback request the number of callback attempts, date and time of last attempt and the number the callback request arrived from. Also, if a contact or account exists in CRM, a reference to the contact/account is added to the callback request.

A user can pick a callback request for handling by selecting the item (first column) and then clicking Pick on the command bar at the top. Picking an item is not mandatory to be able to make the callback, but helps to avoid conflicts between users.

The user opens the callback request by clicking on the item. Callback is carried out by clicking the button next to the phone number the callback request arrived from. See chapter 7 for details on click-to-dial functionality.

After the callback attempt, a phone call is created automatically to record the fact that an attempt was made. All attempts can be seen on callback request form.

The user can also make a callback attempt by clicking the Call button above the grid of callback attempts.

7 Click-to-Dial

Click-to-Dial gives the possibility to make a phone call directly by clicking a button in D365 phone number fields.

Configured for the Click-to-Dial field will have a specific icon as shown below.

Click on the icon will initiate the outbound phone call according to processes described in chapter 2.1.3 for known customer and in 2.1.4 for unknown.

8 Enreach Cloud Management – general use cases

8.1 Voice Service Pool Management

Queue management can be handled flexible from different endpoints.

Management capabilities require BeneCloud Group Manager / Supervisor rights.

Voice Center by Enreach

https://discover.enreachvoice.com

Voice for Android & iOS by Enreach

https://play.google.com/store/apps/details?id=com.benemen.beneapp&hl=en

https://apps.apple.com/fi/app/beneapp/id989797121?l=en

8.2 Voice Center by Enreach

Login to https://discover.enreachvoice.com -> Service Pool Management

Service Pool Management view gives realtime snapshot of voice queues available for given agents and admins.

1. Click any queue you would like to see in more detail and do changes in real time.

   1. Modify directly on this screen existing Agent details. Like activate in the queue, change skill level.

   2. Use “Users” option to remove & add users in the queue

   3. Use “Settings” to modify voice queue workflow.

1. Settings view is used to manage and modify voice queue workflow

   1. Modify queue announcements, transfers where the calls are connected with given option, schedules when queue is open / closed and exceptions

   2. Supervisor can upload new announcements to the system via “Create new prompt” option

   3. “Details” show more detailed information on the configured workflow. These are done and modified via Benemen support request

9 Voice for Android & iOS by Enreach

Voice by Enreach App provides easy to use and feature rich Enreach Cloud voice channel management in Android and iOS smart phones. In addition to managing service pool voice queues, admin user may also set and control voice queue alarms and notification via mobile app. Possible notifiations are delivered as push notification to the mobile device.

Voice by Enreach App brings many benefits for end users too. For example user can handle availability by couple of clicks, go available/offwork for voice channel and if needed handle service phone calls via mobile.

10 Reporting

10.1 Real Time Monitoring Dashboard

Service pool voice queue real-time monitoring dashboard is available via Voice Center by Enreach https://discover.enreachvoice.com -> Service Pool Management.

Selecting any queue will open more detailed view of the queue.

Additonally Service calls tab can be used to see in more detail ongoing and recent service calls.

More advanced real-time dashboards & info monitor views can be provided via Enreach Reports web reporting service and tool, if given service modules are purchased and configured for the customer. When configured, web based Enreach Reports tool can be accessed via Voice Center by Enreach web client.

10.2 Reporting

Rich reporting capabilities can be provided via Enreach Reports online reporting service and Dynamics 365 reporting & dashboards modules.

Enreach Reports online reporting service

Provides detailed direct phone call, service call and call center reporting. When purchased and configured for the customer, web based reporting tool is accessed via Voice Center by Enreach by users / admins with reporting manager rights.

Microsoft Dynamics 365 Dashboards and reports

Provides detailed reports for all the agent work and activities done via Microsoft Dynamics 365. All the saved phone call activities call details and phone originated case data are available for native Dynamics 365 report creation.